 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| C4530 OCXO Typical Applications Base Stations Test Equipment Synthesizers Digital Switching Features Surface Mount Package Reflow Process Compatible AT-Cut and SC-Cut Crystal Options Low Profile Compact Package OCO1000, C4500 Previous Vectron Model Numbers Frequency range Standard frequencies 10 MHz - 160 MHz 10; 12.8; 16.384; 19.2 ; 20; 26, 30.72, 38.4, 52 MHz Frequency stabilities1 [AT Cut Crystal - 10 MHz to 160MHz] Parameter vs. operating temperature range (Referenced to +25C) Parameter Initial tolerance vs. supply voltage change vs. load change vs. aging / day vs aging / year vs. aging / year Warm-up Time Min -100 -250 -250 Min -500 -20 -10 -10 -300 -500 Typ Max. +100 +250 +250 Max. +500 +20 +10 +10 +300 +500 3 Units ppb ppb ppb Units ppb ppb ppb ppb ppb ppb minutes Operating temp range Ordering Code -20 ... +70C D107 -20 ... +70C D257 F257 -40 ... +85C Condition at time of shipment, nominal EFC VS 5% Load 5% after 30 days of operation 60MHz; after 30 days of operation >60MHz; after 30 days of operation to 100ppb of final frequency (1 hour reading) @ +25C Typ Frequency stabilities1 [SC Cut Crystal - 15 to 40 MHz] Parameter vs. operating temperature range (Referenced to +25C) Min -25 -50 Typ Max. +25 +50 Units ppb ppb Operating temp range -20 ... +70C -40 ... +85C Ordering Code D258 F508 Parameter Initial tolerance vs. supply voltage change vs. load change vs. aging / day vs aging /1 Year vs. aging / year (following Years) Warm-up Time Min -200 -5.0 -5.0 -1.0 -100 -80 Typ Max. +200 +5.0 +5.0 +1.0 +100 +80 3 Units ppb ppb ppb ppb ppb ppb minutes Condition at time of shipment, nominal EFC VS 5% Load 5% after 30 days of operation after 30 days of operation to 10ppb of final frequency (1 hour reading) @ +25C Supply voltage (Vs) Parameter Supply voltage [Standard] Supply voltage [Option] Power consumption Min 4.75 3.135 Typ 5 3.3 Max. 5.25 3.465 2.5 1.0 Units VDC VDC Watts Watts Condition Ordering Code SV050 SV033 during warm-up steady state @ +25C Vectron International * www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax v.2006-02-24 * page 1 of 6 Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax C4530 OCXO RF output Parameter Signal [Standard] Load Signal Level (Vol) Signal Level (Voh) Duty cycle Signal [Option] Load Output Power Harmonics Min Typ HCMOS 15 0.5 0.3 3.7 2.4 45 Sinewave +0 50 +2.5 +5.0 -30 dBm dBc 55 pF VDC VDC VDC VDC % Max. Units Condition Ordering Code RFH with Vs=r 5.0V and 15pF load with Vs=3.3V and 15pF load with Vs= 5.0V and 15pF load with Vs=3.3V and 15pF load @ (Voh-Vol)/2 RFS 50 Ohm load 50 Ohm load Frequency Tuning (EFC) Parameter Tuning Range Linearity Tuning Slope Control Voltage Range 0.0 0.0 2.0 1.4 Positive 4.0 2.8 VDC VDC with Vs=5.0VDC with Vs=3.3VDC Min 1.0 3.0 Typ 1.75 5.0 Max. 2.5 8 5 Units ppm ppm % Condition with SC Cut Crystal with AT Cut Crystal Reference Voltage Output (Vref) Parameter Reference Voltage Min 3.85 2.7 Typ 4.0 2.8 Max. 4.15 2.9 Units VDC VDC Condition with Vs=5.0VDC with Vs=3.3VDC Additional parameters Parameter 3 Phase Noise Min Typ -75 -110 -135 -150 -150 -75 -105 -130 -155 -160 Max. Units dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz g 1 10 100 1 10 10 100 1 10 100 Condition Hz with 30.72 MHz Hz SC-Cut Hz HCMOS kHz kHz Hz with 110 MHz AT Cut Hz Sinewave kHz kHz kHz Phase Noise 3 Weight Processing & Packing 10 Handling & processing note Absolute Maximum Ratings Parameter Supply voltage (Vs) Output Load Operable temperature range Storage temperature range Min Typ Max. 7.0 7.0 50 +85 +125 Units V V pF C C Condition with Vs=5.0VDC with Vs=3.3VDC -55 -55 Vectron International * www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax v.2006-02-24 * page 2 of 6 Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax C4530 OCXO Enclosures Type A, for HCMOS output Type B, for Sinewave output, only with reduced AT-stabilities available Type C, for HCMOS output Package Codes: Code A1 A2 Height "H" 12.1 7.8 Pin Length "L" N/A N/A Code B1 B2 Height "H" 12.1 7.8 Pin Length "L" N/A N/A Code C1 C2 Height "H" 12.1 7.8 Pin Length "L" N/A N/A Pin Connections 1 2 3 4 5 6 7 Electronic Frequency Control Input (EFC) Reference Voltage Output Supply Voltage Input (Vs) RF Output Oven Alarm I.C. Intern Connected Ground (Case) 1 2 3 4 5 6 7 RF Output N.C. Pin Connections 1 2 3 4 5 Pin Connections Electronic Frequency Control Input (EFC) Reference Voltage Output Supply Voltage Input (Vs) RF Output Ground (Case) Ground (Case) N.C. Electronic Frequency Control Input (EFC) Supply voltage Vs oscillator Supply voltage Vs heater *Pin 6 must be remain unconnected. Vectron International * www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax v.2006-02-24 * page 3 of 6 Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax C4530 OCXO Standard Shipping Method A X B P K *bei W 24 mm nur untere Lochreihe by W 24 mm only lower hole line Lage im Gurt Position in tape Pin 1 Abwickelrichtung Unwinding direction Gurtunterseite Tape buttom side Gurtoberseite Tape upper side Production tolerance complying DIN IEC 286-3 Enclosure Type Tape width W [mm] Type A1/A2 44 Quantity per meter 37.5 Quantity per reel 175 or 230 Dimension P 32 Vectron International * www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax v.2006-02-24 * page 4 of 6 Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax C4530 OCXO Recommended Reflow Profile tp Tp Ramp up Ts Critical Zone TL to Tp TL Temperature tL Ramp dow n Ts ts preheat 25 t 25C to peak Time Profile Feature Average ramp-up rate (TL to Tp) Preheat -Temperature Min Tsmin) -Temperature Min Tsmax) -Time (min to max) (ts) Tsmax to TL - Ramp-up Rate Time maintainted above - Temperature (TL) - Time (tL) Peak Temperature (Tp) Pb-Free Assembly /Sn-Pb Assembly 3C/second max. 150c 200c 60-180 seconds 3C/second max. 217C 60-150 seconds max 260C Time within 5C of actual Peak Temperature (tp) Ramp-down Rate 20-40 seconds 6C/second max. Profile Feature Time 25C to Peak Temperature Time maintainted above - Temperature (TL) - Time (tL) Pb-Free Assembly /Sn-Pb Assembly 8 minutes max. 217C 60-150 seconds Note: All temperatures refer to topside of the package, measured on the package body surface. Processing note: This FR 4 based SMD OCXO is a non-hermetic construction for use in No-Clean reflow processes and is 6/6 RoHS compliant. If you intend to wash this SMD OCXO, please contact your Sales representative to discuss the possibility. Vectron International * www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax v.2006-02-24 * page 5 of 6 Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax C4530 OCXO How to Order this Product: Step 1 Use this worksheet to forward the following information to your factory representative: Model C4530 Example: C4530 D207 SV050 RFH A1 20.0MHz Stability Code Supply Voltage Code RF Output Code Package Code Frequency Step 2 The factory representative will then respond with a Vectron Model Number in the following Configuration: Model C4530 Package Code [Customer Specified Package Code] Dash Dash Number [Factory Generated 4 digit number] Typical P/N = C4530A1-0001 Notes: 1 Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2 Unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25C) 3 Phase noise degrades with increasing output frequency. 4 Subject to technical modification. 5 Contact factory for availability. Vectron International * www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax v.2006-02-24 * page 6 of 6 Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax |
Price & Availability of C4530
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |